Glue Smartfloor

Once floor is fully assembled, select the carpet/flooring and cut to size; fold flooring/carpet halfway.

Glue SmartFloor using Sikaflex 255FC. Apply glue to all raised surfaces that come into contact with SmartFloor. Use roughly 600 ml Sikaflex 265 per m2. Placing the SmartFloor in vehicle as one entire floor or split floor depends on your approved floor plan. After placing SmartFloor in the vehicle, press the glue beads down thoroughly by walking carefully across floor. Once the floor has been mounted, flooring material can be fitted. Seal all holes to prevent debris, moisture, etc. We recommend filling any gaps with 1/4″ spacers or wood to eliminate height differences.

Apply glue

Seal all holes



If necessary, add plastic spacers